ver 2.1 absolute pressure sensor (0-1 bar) 0 to 100kpa pressure range (1 bar or 15 psi) absolute pressure sensor silicon/grass bonding w afer, high stability miniature surface mount rohs-compatible & pb-free provide the other gage pressure range sensor description the series of pressure sensor is a silicon micro -machined membrane, piezo-resistive sensor. they were designed for extremely cost sensitive applications where the sensing element is to be integral to the oem equipment, and are intended for use with non-corrosive, non-ionic media. they also may be packaged with application specific sensor die so t hat the performance characteristics and output range also can be identified. features uncompensated pressure sensor temperature range -40c ~ +125c low cost, high reliability application for high resolution absolute sensor systems engine controls barometers, altimeters, variometers full scale pressure kpa bar mbar psi atm mmhg mmh 2 o kg/cm2 100 1 1000 15 1 750 10207 1 part number system h s f 0100 - tq package pressure typ e pressure range tel: +86-755-82973805 fax: +86-755-82973550 e-mail: sales@hoperf.com http://www.hoperf.cn
ver 2.1 characteristics item min typical max. unit pressure range 15psi supply voltage 0 5.0 10.0 volts currency 0 1.5 3.0 ma span 60 100 150 mv offset -30 0 30 mv temperature coefficient -16 -22 -28 %fs/100 temperature coefficient of zero -4 -6 -8 %fs/100 nonlinearity 0 0.1 0.5 %f.s bridge resistance 4 5 6 k proof pressure 2 rated fs operating temperature -40 125 storage temperature -40 125 wafer electrical connections 1. best fit straight line. 2. coefficients are typical values between -10 and 40 . pin configuration pad 1 2 3 4 5 6 workingconditions: dc@5v,pressure100kp,temperature 25 , humidity at 30% -90% tel: +86-755-82973805 fax: +86-755-82973550 e-mail: sales@hoperf.com http://www.hoperf.cn
ver 2.1 definition vo+ gnd1 gnd2 vo- vcc nc fr4 package outlines ceremic package outlines tel: +86-755-82973805 fax: +86-755-82973550 e-mail: sales@hoperf.com http://www.hoperf.cn
ver 2.1 ordering information hope microelectronics co.,ltd 4/f, block b3, east industrial area, huaqiaocheng, shenzhen, guangdong, china tel: 86-755-82973805 fax: 86-755-82973550 email: sales@hoperf.com website: http://www.hoperf.com http://www.hoperf.cn http://hoperf.en.alibaba.com this document may contain prelimi nary information and is subject to change by hope microelectronics without notice. hope microelectronics assumes no responsibility or liability for any use of the information contained herein. nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of hope microelectronics or third partie s. the products described in this document are not intended for use in implantation or other direct life support applications where malfunction may result in the direct physical harm or injury to persons. no warranties of any kind, including, but not limited to, the implied warranties of mechantability or fitness for a articular purpose, are offered in this document. ?2006, hope microelectronics co.,ltd. all rights reserved. tel: +86-755-82973805 fax: +86-755-82973550 e-mail: sales@hoperf.com http://www.hoperf.cn
|
